仅对英特尔可见 — GUID: ksx1490145873774
Ixiasoft
仅对英特尔可见 — GUID: ksx1490145873774
Ixiasoft
2.7.14. 使用收发器套件(TTK)/系统控制台/重配置接口进行手动调节 Arria® 10 PCIe设计(Hard IP(HIP)和PIPE) (仅用于调试)
属性 | PCIe模式中的默认值 | 使用TTK/System Console时需要设置的值 | 说明 |
---|---|---|---|
user_fir_coeff_ctrl_sel 0x105[7] |
1’b1 |
1’b0 |
用于在静态和动态(端口)控制之间进行选择的mux
设置此mux会影响 VOD、预抽头(pre tap)和后抽头(post tap)属性 |
pre_emp_switching_ctrl_pre_tap_1t 0x107[4:0] |
由端口pipe_g3_txdeemph上的系数控制 |
取决于由pre_emp_switching_ctrl_pre_tap_1t寄存器设置的值 |
设置1st Pre tap值
|
pre_emp_sign_pre_tap_1t 0x107[5] |
负号 |
取决于由pre_emp_sign_pre_tap_1t register设置的值 |
设置1st Pre tap符号
|
vod_output_swing_ctrl 0x109[4:0] |
由端口pipe_g3_txdeemph上的系数控制 |
取决于由vod_output_swing_ctrl寄存器设置的值 |
输出摆幅
|
pre_emp_switching_ctrl_1st_post_tap 0x105[4:0] |
由端口pipe_g3_txdeemph上的系数控制 |
取决于由pre_emp_switching_ctrl_1st_post_tap 寄存器设置的值 |
设置1st Post tap值
|
pre_emp_sign_1st_post_tap 0x105[6] |
负号 |
取决于由pre_emp_sign_1st_post_tap寄存器设置的值 |
设置1st Post tap符号
|
属性 | PCIe模式中的默认值 | 使用TTK/System Console时需要设置的值 | 说明 |
---|---|---|---|
rrx_pcie_eqz 0x161[2] |
1’b1 |
1’b0 |
用于在静态和动态控制之间进行选择的mux
设置此mux会影响CTLE 4s gain和1s gain值 |
adp_4s_ctle_bypass 0x167[0] |
1’b0 |
|
用于在CTLE 4S手动模式和自适应模式之间进行选择的mux
|
adp_ctle_acgain_4s 0x167[5:1] |
5’b0 |
取决于由adp_ctle_acgain_4s寄存器设置的值 |
设置CTLE manual 4S AC gain
|
Adp_status_sel 0x14C[5:0] |
设置mux为6’b011011 |
设置mux为6’b011011 |
设置test mux,读取从0x177[3:0]聚集的CTLE值 |
Test_mux 0x177[3:0] |
读取值。将4比特读出值映射到5比特增益值 |
读取值。将4比特读出值映射到5比特增益值 |
反映了从CTLE自适应聚集的值 |