仅对英特尔可见 — GUID: lbl1465600497937
Ixiasoft
3.1. Avalon-ST RX接口
3.2. Avalon-ST TX接口
3.3. TX信用接口(TX Credit Interface)
3.4. TX和RX串行数据
3.5. 时钟
3.6. 功能级复位接口(Function-Level Reset (FLR) Interface)
3.7. SR-IOV的控制阴影接口(Control Shadow Interface for SR-IOV)
3.8. 配置扩展总线接口(Configuration Extension Bus Interface)
3.9. Hard IP重配置接口
3.10. 中断接口
3.11. 电源管理接口(Power Management Interface)
3.12. 复位(Reset)
3.13. 传输层配置接口
3.14. PLL重配置接口
3.15. PIPE接口(仅适用于仿真)
6.1.1. Avalon-ST RX和TX接口的TLP Header和Data对齐
6.1.2. Avalon-ST 256-Bit RX接口
6.1.3. Avalon-ST 512-Bit RX接口
6.1.4. Avalon-ST 256-Bit TX接口
6.1.5. Avalon-ST 512-Bit TX接口
6.1.6. TX信用接口(TX Credit Interface)
6.1.7. 解释TX信用接口(Interpreting the TX Credit Interface)
6.1.8. 时钟
6.1.9. 更新流程控制计时器和信用释放(Update Flow Control Timer and Credit Release)
6.1.10. 复位(Resets)
6.1.11. 功能级复位接口(Function-Level Reset (FLR) Interface)
6.1.12. 中断
6.1.13. SR-IOV的控制阴影接口(Control Shadow Interface for SR-IOV)
6.1.14. 传输层配置空间接口(Transaction Layer Configuration Space Interface)
6.1.15. 配置扩展总线接口(Configuration Extension Bus Interface)
6.1.16. 硬核IP状态接口(Hard IP Status Interface)
6.1.17. 串行数据接口
6.1.18. PIPE接口
6.1.19. Hard IP重配置
6.1.20. 功耗管理接口(Power Management Interface)
6.1.21. 测试接口
6.1.22. PLL IP重配置
6.1.23. 消息处理(Message Handling)
8.1.1. 寄存器访问定义
8.1.2. PCI配置头(header)寄存器
8.1.3. PCI Express性能结构
8.1.4. Intel定义的VSEC Capability头
8.1.5. 通用控制和状态寄存器(General Purpose Control and Status Register)
8.1.6. 不可纠正的内部错误状态寄存器
8.1.7. 不可纠正的内部错误掩码寄存器
8.1.8. 可纠正的内部错误状态寄存器
8.1.9. 可纠正的内部错误掩码寄存器
8.1.10. SR-IOV虚拟化扩展功能寄存器地址映射(SR-IOV Virtualization Extended Capabilities Registers Address Map)
8.1.10.1. ARI Enhanced Capability Header
8.1.10.2. SR-IOV增强性能寄存器(SR-IOV Enhanced Capability Registers)
8.1.10.3. 初始VF和总共VF寄存器(Initial VFs and Total VFs Registers)
8.1.10.4. VF Device ID Register
8.1.10.5. Page Size Registers
8.1.10.6. VF基地址寄存器(BARs) 0-5 (VF Base Address Registers (BARs) 0-5)
8.1.10.7. Secondary PCI Express Extended Capability Header
8.1.10.8. 通道状态寄存器(Lane Status Registers)
8.1.10.9. Transaction Processing Hints (TPH) Requester Enhanced Capability Header
8.1.10.10. TPH Requester Capability Register
8.1.10.11. TPH Requester Control Register
8.1.10.12. Address Translation Services ATS Enhanced Capability Header
8.1.10.13. ATS Capability Register and ATS Control Register
9.4.1. ebfm_barwr处理过程
9.4.2. ebfm_barwr_imm过程(ebfm_barwr_imm Procedure)
9.4.3. ebfm_barrd_wait处理过程
9.4.4. ebfm_barrd_nowt处理过程
9.4.5. ebfm_cfgwr_imm_wait过程(ebfm_cfgwr_imm_wait Procedure)
9.4.6. ebfm_cfgwr_imm_nowt处理过程
9.4.7. ebfm_cfgrd_wait处理过程
9.4.8. ebfm_cfgrd_nowt处理过程
9.4.9. BFM配置过程
9.4.10. BFM共享存储器访问过程
9.4.11. BFM日志和消息过程
9.4.12. Verilog HDL格式化函数
仅对英特尔可见 — GUID: lbl1465600497937
Ixiasoft
6.1.19. Hard IP重配置
Hard IP重配置接口是一个包括21‑bit地址总线和8‑bit数据总线的Avalon-MM从接口。您可以使用此总线来动态修改运行时只读配置寄存器的值。 为确保正确的系统操作,在更Hard IP的只读配置寄存器的值后,需要复位或重复PCI Express链路的器件枚举。
信号 |
方向 |
说明 |
---|---|---|
hip_reconfig_clk | Input |
重配置时钟。该时钟的频率范围为100-125 MHz。 |
hip_reconfig_rst_n | Input |
此接口的低电平有效Avalon-MM复位。 |
hip_reconfig_address[20:0] | Input |
21‑bit重配置地址。 |
hip_reconfig_read | Input |
读信号。此接口不是流水线化的。在开始另一个读操作之前,必须等待hip_reconfig_readdata[7:0]从当前读操作返回。 |
hip_reconfig_readdata[7:0] | Output |
8‑bit读数据。hip_reconfig_readdata[7:0]在hip_reconfig_read置位之后的第三个周期上可用。 |
hip_reconfig_readdatavalid | Output | 置位时,hip_reconfig_readdata[7:0]上的数据是有效的。 |
hip_reconfig_write | Input |
写信号。 |
hip_reconfig_writedata[7:0] | Input |
8‑bit写模型。 |
hip_reconfig_waitrequest | Output | 置位时,表明IP core还没准备好回应请求。 |