仅对英特尔可见 — GUID: zim1468340688051
Ixiasoft
3.1. Avalon-ST RX接口
3.2. Avalon-ST TX接口
3.3. TX信用接口(TX Credit Interface)
3.4. TX和RX串行数据
3.5. 时钟
3.6. 功能级复位接口(Function-Level Reset (FLR) Interface)
3.7. SR-IOV的控制阴影接口(Control Shadow Interface for SR-IOV)
3.8. 配置扩展总线接口(Configuration Extension Bus Interface)
3.9. Hard IP重配置接口
3.10. 中断接口
3.11. 电源管理接口(Power Management Interface)
3.12. 复位(Reset)
3.13. 传输层配置接口
3.14. PLL重配置接口
3.15. PIPE接口(仅适用于仿真)
6.1.1. Avalon-ST RX和TX接口的TLP Header和Data对齐
6.1.2. Avalon-ST 256-Bit RX接口
6.1.3. Avalon-ST 512-Bit RX接口
6.1.4. Avalon-ST 256-Bit TX接口
6.1.5. Avalon-ST 512-Bit TX接口
6.1.6. TX信用接口(TX Credit Interface)
6.1.7. 解释TX信用接口(Interpreting the TX Credit Interface)
6.1.8. 时钟
6.1.9. 更新流程控制计时器和信用释放(Update Flow Control Timer and Credit Release)
6.1.10. 复位(Resets)
6.1.11. 功能级复位接口(Function-Level Reset (FLR) Interface)
6.1.12. 中断
6.1.13. SR-IOV的控制阴影接口(Control Shadow Interface for SR-IOV)
6.1.14. 传输层配置空间接口(Transaction Layer Configuration Space Interface)
6.1.15. 配置扩展总线接口(Configuration Extension Bus Interface)
6.1.16. 硬核IP状态接口(Hard IP Status Interface)
6.1.17. 串行数据接口
6.1.18. PIPE接口
6.1.19. Hard IP重配置
6.1.20. 功耗管理接口(Power Management Interface)
6.1.21. 测试接口
6.1.22. PLL IP重配置
6.1.23. 消息处理(Message Handling)
8.1.1. 寄存器访问定义
8.1.2. PCI配置头(header)寄存器
8.1.3. PCI Express性能结构
8.1.4. Intel定义的VSEC Capability头
8.1.5. 通用控制和状态寄存器(General Purpose Control and Status Register)
8.1.6. 不可纠正的内部错误状态寄存器
8.1.7. 不可纠正的内部错误掩码寄存器
8.1.8. 可纠正的内部错误状态寄存器
8.1.9. 可纠正的内部错误掩码寄存器
8.1.10. SR-IOV虚拟化扩展功能寄存器地址映射(SR-IOV Virtualization Extended Capabilities Registers Address Map)
8.1.10.1. ARI Enhanced Capability Header
8.1.10.2. SR-IOV增强性能寄存器(SR-IOV Enhanced Capability Registers)
8.1.10.3. 初始VF和总共VF寄存器(Initial VFs and Total VFs Registers)
8.1.10.4. VF Device ID Register
8.1.10.5. Page Size Registers
8.1.10.6. VF基地址寄存器(BARs) 0-5 (VF Base Address Registers (BARs) 0-5)
8.1.10.7. Secondary PCI Express Extended Capability Header
8.1.10.8. 通道状态寄存器(Lane Status Registers)
8.1.10.9. Transaction Processing Hints (TPH) Requester Enhanced Capability Header
8.1.10.10. TPH Requester Capability Register
8.1.10.11. TPH Requester Control Register
8.1.10.12. Address Translation Services ATS Enhanced Capability Header
8.1.10.13. ATS Capability Register and ATS Control Register
9.4.1. ebfm_barwr处理过程
9.4.2. ebfm_barwr_imm过程(ebfm_barwr_imm Procedure)
9.4.3. ebfm_barrd_wait处理过程
9.4.4. ebfm_barrd_nowt处理过程
9.4.5. ebfm_cfgwr_imm_wait过程(ebfm_cfgwr_imm_wait Procedure)
9.4.6. ebfm_cfgwr_imm_nowt处理过程
9.4.7. ebfm_cfgrd_wait处理过程
9.4.8. ebfm_cfgrd_nowt处理过程
9.4.9. BFM配置过程
9.4.10. BFM共享存储器访问过程
9.4.11. BFM日志和消息过程
9.4.12. Verilog HDL格式化函数
仅对英特尔可见 — GUID: zim1468340688051
Ixiasoft
5.6. 通道布局和PLL使用
下图显示了Hard Reset Controller (HRC)和PLL与 Intel® Stratix® 10的 Gen1,Gen2和Gen3, x1, x2, x4, x8和x16 variants之间的通道布局和连接。
对于连接到Application Layer的 Avalon® -ST and Avalon® -MM接口,通道布局是相同的。
注: Stratix® 10器件中的所有PCIe hard IP实例都是Gen3 x16。Hard Reset Controller驱动全部16个通道。然而,当使用少于16个通道时,通道8-15可用于其他协议。请参考Channel Availability获得更多信息。
图 23. Gen1 and Gen2 x1
图 24. Gen1 and Gen2 x2
图 25. Gen1 and Gen2 x4
图 26. Gen1 and Gen2 x8
图 27. Gen1 and Gen2 x16
图 28. Gen3 x1
图 29. Gen3 x2
图 30. Gen3 x4
图 31. Gen3 x8
相关信息