仅对英特尔可见 — GUID: mmk1520633316811
Ixiasoft
4.4.4. 电源管理
参数 |
值 |
说明 |
---|---|---|
Endpoint L0s acceptable latency |
Maximum of 64 ns Maximum of 128 ns Maximum of 256 ns Maximum of 512 ns Maximum of 1 us Maximum of 2 us Maximum of 4 us No limit |
此设计参数指定器件与根复合之间任意链路退出L0状态时,器件可接受的最大延迟。其设置Device Capabilities Register(0x084)中Endpoint L0可接受延迟字段的只读值。 此Endpoint不支持L0s或L1状态。但在交换系统中,可能有链路连接到L0s和L1使能的交换机。设置此参数以允许系统配置软件读取系统中所有器件的可接受延迟以及每个链路的退出延迟,从而确定可使能Active State Power Management(ASPM)的链路。此设置对Root Port禁用。 此参数的默认值是64 ns。对于大多数设计而言,这是最安全的设置。 |
Endpoint L1 acceptable latency | Maximum of 1 us Maximum of 2 us Maximum of 4 us Maximum of 8 us Maximum of 16 us Maximum of 32 us Maximum of 64 usNo limit |
此值表示从L1状态转换到L0状态时Endpoint能承受的可接受延迟。也是Endpoint内部缓冲的间接度量。其设置Device Capabilities Register的Endpoint L1可接受延迟字段的只读值。 此Endpoint不支持L0s或L1状态。但交换系统中可能有链路连接到L0s和L1使能的交换机。设置此参数允许系统配置软件读取系统中所有器件的可接受延迟以及每个链路的退出延迟,从而确定可使能Active State Power Management(ASPM)的链路。此设置对Root Port禁用。 此参数的默认值是1 µs。对于大多数设计而言,这是最安全的设置。 |