仅对英特尔可见 — GUID: mwh1410384390395
Ixiasoft
1. 系统调试工具概述
2. 使用Signal Tap逻辑分析仪进行设计调试
3. Quick Design Verification with Signal Probe
4. 使用外部逻辑分析器进行在系统调试(In-System Debugging Using External Logic Analyzers)
5. 存储器和常量的在系统修改(In-System Modification of Memory and Constants)
6. 使用In-System Sources and Probes进行设计调试
7. 使用System Console分析和调试设计
8. 调试收发器链路
9. Intel® Quartus® Prime Pro Edition用户指南调试工具存档
A. Intel® Quartus® Prime Pro Edition用户指南
2.1. Signal Tap逻辑分析仪
2.2. Signal Tap Logic Analyzer任务流程概述
2.3. 配置Signal Tap Logic Analyzer
2.4. 定义触发器
2.5. 编译设计
2.6. 对目标器件或者器件编程
2.7. 运行Signal Tap Logic Analyzer
2.8. 查看,分析和使用采集的数据
2.9. 使用Signal Tap Logic Analyzer调试部分重配置设计
2.10. 使用Signal Tap Logic Analyzer调试基于模块的设计
2.11. 其他功能
2.12. 设计实例:使用Signal Tap Logic Analyzers
2.13. 自定义触发流程应用示例
2.14. Signal Tap脚本支持
2.15. 使用Signal Tap Logic Analyzer进行设计调试修订历史
7.1. System Console简介
7.2. System Console调试流程
7.3. 与System Console交互的IP内核
7.4. 启动System Console
7.5. System Console GUI
7.6. System Console命令
7.7. 在命令行模式下运行System Console
7.8. System Console服务
7.9. System Console示例和教程
7.10. 板载 Intel® FPGA Download Cable II支持
7.11. 系统验证流程中的MATLAB*和Simulink*
7.12. 不推荐使用的命令
7.13. 使用System Console分析和调试设计修订历史
仅对英特尔可见 — GUID: mwh1410384390395
Ixiasoft
8.14.1. Transceiver Toolkit命令
下表列出了可用的Transceiver Toolkit脚本命令。
命令 | 参数 | 功能 | ||||||
---|---|---|---|---|---|---|---|---|
transceiver_channel_rx_get_data | <service-path> | 返回当前检查器数据的列表。结果按比特数,错误数和误码率的顺序排列。 | ||||||
transceiver_channel_rx_get_dcgain | <service-path> | 得到接收器通道上的DC增益值。 | ||||||
transceiver_channel_rx_get_dfe_tap_value | <service-path> <tap position> | 在指定的布线(tap)位置获取指定通道的当前布线(tap)值。 | ||||||
transceiver_channel_rx_get_eqctrl | <service-path> | 得到接收器通道上的均衡控制值。 | ||||||
transceiver_channel_rx_get_pattern | <service-path> | 按名称返回当前数据检查器码型。 | ||||||
transceiver_channel_rx_has_dfe | <service-path> | 报告您指定的通道是否具有DFE功能。 | ||||||
transceiver_channel_rx_is_checking | <service-path> | 如果检查程序正在运行,则返回非零值。 | ||||||
transceiver_channel_rx_is_dfe_enabled | <service-path> | 报告在指定的通道上是否使能了DFE特性。 | ||||||
transceiver_channel_rx_is_locked | <service-path> | 如果检查器锁定到输入数据上,则返回非零值。 | ||||||
transceiver_channel_rx_reset_counters | <service-path> | 复位检查器内的比特和错误计数器。 | ||||||
transceiver_channel_rx_reset | <service-path> | 对指定的通道进行复位。 | ||||||
transceiver_channel_rx_set_dcgain | <service-path> <value> | 设置接收器通道上的DC增益值。 | ||||||
transceiver_channel_rx_set_dfe_enabled | <service-path> <disable(0)/enable(1)> | 在指定的通道上使能或禁用DFE功能。 | ||||||
transceiver_channel_rx_set_dfe_tap_value | <service-path> <tap position> <tap value> | 将指定的布线位置上指定的通道的当前布线值设置为指定的值。 | ||||||
transceiver_channel_rx_set_dfe_adaptive | <service-path> <adaptive-mode> | 设置指定通道的DFE自适应模式。
|
||||||
transceiver_channel_rx_set_eqctrl | <service-path> <value> | 设置接收器通道上的均衡控制值。 | ||||||
transceiver_channel_rx_start_checking | <service-path> | 启动检查器。 | ||||||
transceiver_channel_rx_stop_checking | <service-path> | 停止检查器。 | ||||||
transceiver_channel_rx_set_pattern | <service-path> <pattern-name> | 将预期码型设置为码型名称指定的码型。 | ||||||
transceiver_channel_rx_set_word_aligner_enabled | <service-path> <disable(0)/enable(1)> | 使能或禁用指定通道的字对齐器(word aligner)。 | ||||||
transceiver_channel_rx_is_word_aligner_enabled | <service-path> <disable(0)/enable(1)> | 报告在指定的通道上是否使能了字对齐器功能。 | ||||||
transceiver_channel_rx_is_locked | <service-path> | 如果检查器锁定到输入信号上,则返回非零值。 | ||||||
transceiver_channel_rx_is_rx_locked_to_data | <service-path> | 如果收发器处于lock to data (LTD)模式,则返回1。否则返回0。 | ||||||
transceiver_channel_rx_is_rx_locked_to_ref | <service-path> | 如果收发器处于lock to reference (LTR)模式,则返回1。否则返回0。 |
命令 | 参数 | 功能 |
---|---|---|
transceiver_channel_tx_disable_preamble | <service-path> | 在生成开始时禁用前同步码模式(preamble mode)。 |
transceiver_channel_tx_enable_preamble | <service-path> | 在生成开始时使能前同步码模式(preamble mode)。 |
transceiver_channel_tx_get_number_of_preamble_beats | <service-path> | 返回发送前导字的节拍数。 |
transceiver_channel_tx_get_pattern | <service-path> | 返回码型。 |
transceiver_channel_tx_get_preamble_word | <service-path> | 返回前导字。 |
transceiver_channel_tx_get_preemph_pretap1 | <service-path> | 得到发送器通道上的预加重第一个预布线值(pre-emphasis first pre-tap value)。 |
transceiver_channel_tx_get_preemph_posttap1 | <service-path> | 得到发送器通道上的预加重第一个后布线值(pre-emphasis first post-tap value)。 |
transceiver_channel_tx_get_preemph_posttap2 | <service-path> | 得到发送器通道上的预加重第二个后布线值(pre-emphasis second post-tap value)。 |
transceiver_channel_tx_get_preemph_pretap2 | <service-path> | 得到发送器通道上的预加重第二个预布线值(pre-emphasis second pre-tap value)。 |
transceiver_channel_tx_get_vodctrl | <service-path> | 得到发送器通道上的VOD控制值。 |
transceiver_channel_tx_inject_error | <service-path> | 将1-bit错误注入到生成器的输出中。 |
transceiver_channel_tx_is_generating | <service-path> | 如果生成器正在运行,则返回非零值。 |
transceiver_channel_tx_is_preamble_enabled | <service-path> | 如果前同步码模式(preamble mode)使能,则返回非零值。 |
transceiver_channel_tx_set_number_of_preamble_beats | <service-path> <number-of-preamble-beats> | 设置发送前导字的节拍数。 |
transceiver_channel_tx_set_pattern | <service-path> <pattern-name> | 将输出码型设置为码型名称指定的码型。 |
transceiver_channel_tx_set_preamble_word | <service-path> <preamble-word> | 设置要发送的前导字。 |
transceiver_channel_tx_set_preemph_pretap1 | <service-path> <value> | 设置发送器通道上的预加重第一个预布线值(pre-emphasis first pre-tap value)。 |
transceiver_channel_tx_set_preemph_posttap1 | <service-path> <value> | 设置发送器通道上的预加重第一个后布线值(pre-emphasis first post-tap value)。 |
transceiver_channel_tx_set_preemph_posttap2 | <service-path> <value> | 设置发送器通道上的预加重第二个后布值(pre-emphasis second post-tap value)。 |
transceiver_channel_tx_set_preemph_pretap2 | <service-path> <value> | 设置发送器通道上的预加重第二个预布线值(pre-emphasis second pre-tap value)。 |
transceiver_channel_tx_set_vodctrl | <service-path> <vodctrl value> | 设置发送器通道上的VOD控制值。 |
transceiver_channel_tx_start_generation | <service-path> | 启动生成器。 |
transceiver_channel_tx_stop_generation | <service-path> | 停止生成器。 |
命令 | 参数 | 功能 |
---|---|---|
transceiver_debug_link_get_pattern | <service-path> | 得到链路用于运行测试的码型。 |
transceiver_debug_link_is_running | <service-path> | 如果在链路上运行测试,则返回非零值。 |
transceiver_debug_link_set_pattern | <service-path> <data pattern> | 设置链路用于运行测试的码型。 |
transceiver_debug_link_start_running | <service-path> | 开始使用当前选择的测试码型运行测试。 |
transceiver_debug_link_stop_running | <service-path> | 停止运行测试。 |
命令 | 参数 | 功能 |
---|---|---|
transceiver_reconfig_analog_get_logical_channel_address | <service-path> | 得到当前设置的收发器逻辑通道地址。 |
transceiver_reconfig_analog_get_rx_dcgain | <service-path> | 得到当前逻辑通道地址指定的接收器通道上的DC增益值。 |
transceiver_reconfig_analog_get_rx_eqctrl | <service-path> | 由当前逻辑通道地址指定的接收器通道上的均衡控制值。 |
transceiver_reconfig_analog_get_tx_preemph_pretap1 | <service-path> | 得到当前逻辑通道地址指定的发送器通道上的预加重第一个预布线值(pre-emphasis first pre-tap value)。 |
transceiver_reconfig_analog_get_tx_preemph_posttap1 | <service-path> | 得到当前逻辑通道地址指定的发送器通道上的预加重第一个后布线值(pre-emphasis first post-tap value)。 |
transceiver_reconfig_analog_get_tx_preemph_posttap2 | <service-path> | 得到当前逻辑通道地址指定的发送器通道上的预加重第二个后布线值(pre-emphasis second post-tap value)。 |
transceiver_reconfig_analog_get_tx_preemph_pretap2 | <service-path> | 得到当前逻辑通道地址指定的发送器通道上的预加重第二个预布线值(pre-emphasis second pre-tap value)。 |
transceiver_reconfig_analog_get_tx_vodctrl | <service-path> | 得到当前逻辑通道地址指定的发送器通道上的VOD控制值。 |
transceiver_reconfig_analog_set_logical_channel_address | <service-path> <logic channel address> | 设置收发器逻辑通道地址。 |
transceiver_reconfig_analog_set_rx_dcgain | <service-path> <dc_gain value> | 设置当前逻辑通道地址指定的接收器通道上的DC增益值。 |
transceiver_reconfig_analog_set_rx_eqctrl | <service-path> <eqctrl value> | 设置当前逻辑通道地址指定的接收器通道上的均衡控制值。 |
transceiver_reconfig_analog_set_tx_preemph_pretap1 | <service-path> <value> | 设置当前逻辑通道地址指定的发送器通道上的预加重第一个预布线值(pre-emphasis first pre-tap value)。 |
transceiver_reconfig_analog_set_tx_preemph_posttap1 | <service-path> < value> | 设置当前逻辑通道地址指定的发送器通道上的预加重第一个后布线值(pre-emphasis first post-tap value)。 |
transceiver_reconfig_analog_set_tx_preemph_posttap2 | <service-path> <value> | 设置当前逻辑通道地址指定的发送器通道上的预加重第二个后布线值(pre-emphasis second post-tap value)。 |
transceiver_reconfig_analog_set_tx_preemph_pretap2 | <service-path> <value> | 设置当前逻辑通道地址指定的发送器通道上的预加重第二个预布线值(pre-emphasis second pre-tap value)。 |
transceiver_reconfig_analog_set_tx_vodctrl | <service-path> <vodctrl value> | 设置当前逻辑通道地址指定的发送器通道上的VOD控制值。 |
命令 | 参数 | 功能 |
---|---|---|
get_channel_type | <service-path> <logical-channel-num> | 报告位于<service-path>的重配置模块的通道<logical-channel-num >的检测类型(GX/GT)。 |
set_channel_type | <service-path> <logical-channel-num> <channel-type> | 将位于<service-path>的重配置模块的通道<logical-channel-num>的检测类型覆盖成指定类型(0:GX, 1:GT)。 |