Ethernet Port Configuration Tool - ESX*

19439
10/16/2026

介绍

Download for Ethernet Port Configuration Tool - ESX*

可供下载

  • VMware*
  • 大小:2.8 MB
  • SHA512:664fff7b9038831bc494211bf2f3235a3ddcd8681784023025176ef1eb9cb53c1b83f5578c593be2f7bf94406791395762b1e1af0f64d0f5450a4456ccdc08b8

详细说明

Overview 

The Ethernet Port Configuration Tool (EPCT) is a command line utility that allows users to change the link type of a device. The supported types are defined within the adapter's NVM. This utility displays only the devices that potentially support reconfiguration.

 

NOTE:

  • A reboot is required to apply configuration changes.
  • You may lose link if you change the link type of your device from any port option that contains three to seven ports to a port option that enables multi-lane interfaces, such as 2x100Gbps, 2x50Gbps, or 1x100Gbps. One of the following methods may resolve the issue:
    • Use the utility to change the port option to 8x10Gbps; reboot your system; change to your originally desired configuration.
    • Completely power cycle your system.
  • If the tool displays an error such as "Access error" or "Cannot initialize port," you may be using an outdated driver. Please download the latest driver from https://support.intel.com and try again.

 

Supported operating systems

  • Microsoft Windows Server*
  • Linux* Kernel
  • Red Hat* Enterprise Linux*
  • SUSE* Linux Enterprise Server
  • Canonical Ubuntu*
  • Debian*
  • openEuler* for AArch64 (only on Intel® Ethernet E810 Series)
  • UEFI
  • UEFI ARM 2.3, 2.4, 2.6, 2.7, 2.8, 2.9
  • VMware* ESXi*
  • FreeBSD*

Note:  On systems running Linux, FreeBSD, Solaris, or ESXi, the base driver must be present for EPCT to function correctly.

此下载对下面列出的产品有效。

本页面上的内容是原始英文内容的人工翻译与计算机翻译的组合。我们提供此内容是为了您的便利并且仅供参考,未必完整或准确。如果本页面的英文版与翻译版之间存在任何冲突,应以英文版为准。 查看此页面的英语版本。